- Frequency response (-3 dB) (1)
- 88 Hz - 22 kHz
- Frequency range (-10 dB) (1)
- 77 Hz - 24 kHz
- Frequency range (-10 dB) (1)
- —
- Nominal coverage angle
- 90 degrees conical
- Average
- 60 W
- Programme
- 120 W
- Peak
- 240 W
- Recommended amplifier power
- 120 W @ 16 Ohms
- Nominal impedance (Lo, Z)
- 16 Ohms
- Average
- 107 dB
- Peak
- 113 dB
- Dual concentric point source driver
- 1 x 130 mm (5.0") Dual Concentric driver, using Omnimagnet technology
- Low frequency
- 35 mm (1.38") voice coil, treated multi fi ber paper pulp cone
- High frequency
- 20 mm (0.79") PEI dome
- Backcan
- Zinc plated steel
- Grille
- Steel, with weather resistant coating
- Safety features
- Safety ring located at rear of enclosure for load bearing safety bond
- Clamping design
- Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36") Recommended clamp torque: 1.5 Nm
- Blind mount (BM)
- —
- Pre install (PI)
- —
- Cable entry options
- Cable clamp & squeeze connector for conduit up to 22 mm
- Conduit knockouts on PI Backcan
- —
- Connectors
- Removable locking connector with screw terminals with “loop through” facility
- Bezel diameter
- 274.0 mm (10.79")
- Front of ceiling to rear of backcan
- 98.6 mm (3.88")
- BM model: Front of ceiling to <br />rear of backcan
- —
- BM model: Front of ceiling <br />to top of safety loop
- —
- PI model: Front of ceiling surface <br />to rear of speaker unit
- —
- PI model: Front of accessory backcan <br />bezel to top of safety loop
- —
- Hole cutout diameter (all models)
- 253.0 mm (9.96")
- Net weight (ea)
- 4.7 kg (10.36 lbs)
- CMS 803DC BM
- —
- CMS 803DC PI
- —
- PI Backcan
- —
- Included accessories
- C-Ring, tile-bridge kit, paint mask, cut-out template, grille
- Optional accessories
- Plaster (mud) ring, Arco grille
- Packed quantity
- 2